Product Categories

Fingerprint Module Parts

[15]

Contact Now

Hangzhou Grow Technology Co., Ltd.

City:hangzhou

Province/State:zhejiang

Country/Region:china

Contact Person:MsWinni Wu

View Contact Details

Contact Now

China GROW K220+R503 DC10-24V Two Relay Output With Administrator/User Fingerprint Access Control Board wholesale

GROW K220+R503 DC10-24V Two Relay Output With Administrator/User Fingerprint Access Control Board

Ask Latest Price

Video Channel

Place of Origin :China

Certification :CE

MOQ :1

Packaging Details :Carton

Delivery Time :Peak Season Lead Time: within 15 workdays Off Season Lead Time: within 15 workdays

Payment Terms :T/T,PayPal

Supply Ability :5000

Model NO. :K220+R503

Screen :as Picture

Communication Interface :RS232

Fingerprint Capacity :200

Power Supply :DC 10V--24V

Standby Current :<10mA

Output :Relay(Max. Current:10A)

Transport Package :Standard Export Carton Package

Specification :Power supply: DC 10V--24V

Trademark :GROW

Origin :China

HS Code :8471609000

Voice Service :Without Voice Service

Clock :Without Clock

Color :as Picture

Samples :US$ 23.9/Piece 1 Piece(Min.Order) |

Customization :Available | Customized Request

Shipping Cost :about shipping cost and estimated delivery time.

Payment Method :Initial Payment Full Payment

Currency :US$

Return&refunds :You can apply for a refund up to 30 days after receipt of the products.

Contact Now

Add to Cart

View Product Description

Technical Parameters

·Power supply:DC10V--24V
·Output:Relay(Max. current: 10A)
·Stand-by mode current:＜10mA
·Fingerprint capacity:200 pieces
·Standby current:6mA(DC12V)
·Relay Time:0.5s-60s or over 60s-In normally open mode-press finger-relay open,press again-relay closed.

Operation Instruction

1.SET Button(K1-K2)
1.1 Register Administrator Fingerprint:Press SET button shortly,system in administrator register status and blue indicator light flash fast, put the same finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously. If no need for adding fingerprint, waiting a few seconds to exit.

1.2 Delete Fingerprint:
1.2.1 Delete single relay position fingerprints:Long press the corresponding SET button,blue indicator light flash fast,hear long "Di" beep, loosen the finger, the relay indicator light on and hear music, means this location of the admin and user fingerprints are deleted;
1.2.2 Delete all relay position fingerprints(Back to factory default):Long press any SET button to hear long "Di" beep twice, loosen the finger,all indicator light on, means initialization operation successful,back to factory default.

2.Register User Fingerprint:Press the administrator fingerprint about 10 seconds until hear the music and blue indicator light flash fast,means can add user fingerprint. Put the same user finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously. If no need for adding fingerprint, waiting a few seconds to exit. (Note:The storage location of the user's fingerprint depends on the storage location of the administrator's fingerprint; If the administrator's fingerprint is stored in No.1 and No.2 at the same time, the user's fingerprint will be stored in No.1 by default.)

3.Delete User Fingerprint:Press the administrator fingerprint about 20 seconds until hear "Di-" and music,means user fingerprints at this location are deleted. (Note:The delete location of the user's fingerprint depends on the storage location of the administrator's fingerprint. If the administrator's fingerprint is stored in No.1 and No.2 at the same time, the user fingerprints in No.1 will be deleted by default.)

4.Set Relay Time:Rotate S1 or S2 to set the closing time of the relay from 0.5 to 60 seconds. When over 60 seconds, it will in the normally open normally closed state,relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. The relay is contact output, switch signal, no voltage output.

5.Usage:Press the finger,the relay closes after the fingerprint passes, and the closing time is determined by S1 or S2.

Note:
1. All indicator lights are off in standby state, and the lights are on in working state;
2.If want to close the module indicator light when in the normally open mode, long press any SET button to hear long "Di" beep three times. Repeat this action to open.

K220 can be used together with R502-A,R502-AW,R502-F,R503 fingerprint module

R503 Specifications

Model	R503
Type	Capacitive Fingerprint Module
Interface	UART(TTL)
Resolution	508 DPI
Voltage	DC 3.3V
Fingerprint Capacity	200
Sensing array	192*192 pixel
Working current	20mA
Standby current	Typical touch standby voltage: 3.3V, Average current: 2uA
Fingerprint module external size	Diameter 28 (mm)
Fingerprint module inner size	Diameter 23.5 (mm)
Fingerprint module height	19 (mm)
Effective collection area	Diameter 15.5 (mm)
Connector	SH1.0-6Pin
LED Control	YES
LED Color	Blue and Red
Scanning Speed	< 0.2 second
Verification Speed	< 0.3 second
Matching Method	1:1; 1:N
FRR	≤1%
FAR	≤0.001%
Work environment	-20C ---60C
Work Humidity	10-85%
Anti-static capacity	15KV
Abrasive resistance intensity	1 million times
Communications baud rate (UART):	(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)

Files

·ProvideFree Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual

K220 Operation Video on Youtube:https://youtu.be/YQXeH9AGbco

If need SDK files,pls contact us.